1/2 US gallon of chlorobenzene equals 0.00209 tonne
To convert a quantity of a substance or material expressed as a volume to mass we simply use the formula:
mass = density × volume
We want to calculate the mass in tonnes from a volume in US gallons. We have the density table at the bottom of this web page that shows us the densities values in kg/m³, so we will use the folowing formula (see why below):
mass = d × v × vcf, where mcf is the conversion factor to convert from tonne to kilogram (table near the end of this page) and vcf is the conversion factor to convert from US gallon to cubic meters.
So, plugging these values in the formula above, we get:
mass = 1105.8 × 0.5 × 0.003785
mass = 2.093
mass = 0.002093 tonne (answer)
There are other ways to convert from volume to mass. This is one of them.
Well, by definition of density we just need to use the formula:
mass = density × volume
Example: How much does 2 cubic meters of gasoline weigh in kilograms if the gasoline density is 750 kg/m³?
Plugging the values in the formula, we get
mass = density × volume = 750 × 2 = 1500 Kg
Very simple isn't it? Yes, it is as simple as that. But this works fine when the density value we have (from a chart for example) is defined using the same unit of volume and mass that we will use in the formula. For example, mass in kg and volume in liters. If we have, for example, mass in pounds and volume in gallons, we should do something to correct our result.
To transform the mass from pounds to kilograms we should multiply the mass in pounds by 0.45359237. We will call 0.45359237 the mass conversion factor - mcf
Matematically we write:
mass in kilograms = mass in pounds × mcf or mkg = mlb × mcf (1)
To transform the volume from gallons to cubic meters we should multiply the volume in cubic meters by 0.003785411784. We will call 0.003785411784 the volume conversion factor - vcf
Matematically we write:
volume in cubic meters = volume in gallons × vcf or vm³ = vgal × vcf (2)
Now, dividing the equation (1) by the equation (2), we get
mkg = mlb × mcf, or
mkg = mlb × mcf, but mkg is, by definition, the density (d) in kg/m³, so
d = mlb × mcf
Rearranging the formula above we get
mlb = d × vgal × vcf
Finally, we can generalize this formula any units of mass and volume, since we know how to find the values for mcf and vcf (Check the factor tables below).
m = d × v × vcf
That is exactly the formula that we use in this calculator. You can see how this formula works reading the example above or/and choosing another one at the bottom of this page.
|US gallons to tonnes of chlorobenzene|
|0.32 US gallon||=||0.00134 tonne|
|0.33 US gallon||=||0.00138 tonne|
|0.34 US gallon||=||0.00142 tonne|
|0.35 US gallon||=||0.00147 tonne|
|0.36 US gallon||=||0.00151 tonne|
|0.37 US gallon||=||0.00155 tonne|
|0.38 US gallon||=||0.00159 tonne|
|0.39 US gallon||=||0.00163 tonne|
|0.4 US gallon||=||0.00167 tonne|
|0.41 US gallon||=||0.00172 tonne|
|0.42 US gallon||=||0.00176 tonne|
|0.43 US gallon||=||0.0018 tonne|
|0.44 US gallon||=||0.00184 tonne|
|0.45 US gallon||=||0.00188 tonne|
|0.46 US gallon||=||0.00193 tonne|
|0.47 US gallon||=||0.00197 tonne|
|0.48 US gallon||=||0.00201 tonne|
|0.49 US gallon||=||0.00205 tonne|
|0.5 US gallon||=||0.00209 tonne|
|0.51 US gallon||=||0.00213 tonne|
|0.52 US gallon||=||0.00218 tonne|
|0.53 US gallon||=||0.00222 tonne|
|0.54 US gallon||=||0.00226 tonne|
|0.55 US gallon||=||0.0023 tonne|
|0.56 US gallon||=||0.00234 tonne|
|0.57 US gallon||=||0.00239 tonne|
|0.58 US gallon||=||0.00243 tonne|
|0.59 US gallon||=||0.00247 tonne|
|0.6 US gallon||=||0.00251 tonne|
|0.61 US gallon||=||0.00255 tonne|
|0.62 US gallon||=||0.0026 tonne|
|0.63 US gallon||=||0.00264 tonne|
|0.64 US gallon||=||0.00268 tonne|
|0.65 US gallon||=||0.00272 tonne|
|0.66 US gallon||=||0.00276 tonne|
|0.67 US gallon||=||0.0028 tonne|
|0.68 US gallon||=||0.00285 tonne|
Note: Values are rounded to 3 significant figures. Fractions are rounded to the nearest 8th fraction.
The above tables contains values for the densities of many common substances in kilograms per cubic meter. The last column shows at which temperature the measurement was made. See details on how to use it above.
|Volume Unit||Factor to convert to m³ (vcf)|
|UK fluid ounce||0.0000284130625|
|US fluid ounce||0.00002957352956|
|Mass Unit||Factor to convert to kg (mcf)|
The above tables contains the conversion factors to convert units of volume to cubic meter, as well as, to convert other units of mass to kilograms. See details above.
While every effort is made to ensure the accuracy of the information provided on this website, neither this website nor its authors are responsible for any errors or omissions, or for the results obtained from the use of this information. All information in this site is provided “as is”, with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information.