1245 Minutes to Degrees

1245' = 20.75°

Calculation: ° = 1245' × 0.0166667 = 20.75°

Minute to Degree Converter

Choose the type of measurement to convert
Select the source unit to convert from
Select the target unit to convert to
Enter a numeric value or fraction to convert
Sig. Figures:

How wide is 1,245'?

1,245 minute (20.8 degrees) is comparable to the pitch angle of a typical house roof.

What does 1,245' look like?

Illustration of a house with pitched roof
1,245 minute (20.8 degrees) is comparable to the pitch angle of a typical house roof.

How to Convert Minute to Degree

1 minute = 0.0166667 degrees

Degree = Minute × 0.0166667

Example: 1245' × 0.0166667 = 20.75°

Reverse Conversion

To convert degrees back to minutes:

  • Remember, 1 degree equals 60 minutes.
  • To convert 20.75° to', multiply 20.75 x 60, resulting in 1245'.

1245 ' is also equal to:

  • 0.36216 radian
  • 23.056 gradian
  • 0.057639 turn
About these units

Minute: An arcminute (minute of arc) is 1/60 of a degree.It is used in astronomy, optics, navigation, geodesy, and surveying for small angular measurements.

Degree: The degree (°) is a non-SI unit of plane angle defined as 1/360 of a full rotation.It is accepted for use with the SI due to its long-standing practical importance in navigation, surveying, engineeri...

Frequently Asked Questions

How much is 1245 minutes in degrees?

1245 minutes equals 20.75 degrees. This is calculated by multiplying 1245 by the conversion factor 0.0166667.

What does 1245 minutes look like in degrees?

1245 minutes (20.75 degrees) is multiple degrees when expressed in arc minutes.

How do you calculate 1245 minutes to degrees?

Multiply 1245 by the conversion factor 0.0166667. The calculation is 1245 × 0.0166667 = 20.75 degrees. This factor is defined by international measurement standards.

Share This Calculation

1245 minutes = 20.75 degrees
1245 minutes = 20.75 degrees — conversion chart

For general conversions between minutes and degrees, see the minutes to degrees converter.

Also convert Minutes to:

Conversion factors verified against BIPM, ISO 80000-3 1 turn = 2π rad = 360° (exact, ISO 80000-3). Last reviewed: March 2026
Tiago Fernandes Reviewed by Tiago Fernandes

All unit conversions on CoolConversion use conversion factors defined or documented by internationally recognised standards bodies (such as ISO and NIST), including both SI and non-SI units.