Convert Terabit to Gigabyte

This page converts terabits to gigabytes.

Bit & Byte Number Bases W to dBm

How to Convert Terabit to Gigabyte

Converting between data units requires understanding that all data is measured in bits at the fundamental level.

Step 1: Identify the Base Values

Each data unit has a specific value in bits:

1 terabit = 1,000,000,000,000 bits
1 gigabyte = 8,000,000,000 bits

Step 2: Apply the Conversion Formula

Gigabyte = Terabit × (1,000,000,000,000 ÷ 8,000,000,000)

Step 3: Calculate Your Result

For 1 terabit:

1 × 125 = 125 gigabytes

Understanding Binary vs Decimal Units

Data storage uses two measurement systems:

Decimal (SI): Uses powers of 1000 (kB, MB, GB, TB) - commonly used by hard drive manufacturers
Binary (IEC): Uses powers of 1024 (KiB, MiB, GiB, TiB) - used by operating systems and RAM

This difference explains why a "500 GB" hard drive shows as ~465 GiB in your operating system.

Terabit to Gigabyte Conversion Table

Common terabit values converted to gigabyte:

1 Tbit: 125 GB
2 Tbit: 250 GB
4 Tbit: 500 GB
8 Tbit: 1,000 GB
16 Tbit: 2,000 GB
32 Tbit: 4,000 GB
64 Tbit: 8,000 GB
128 Tbit: 16,000 GB
256 Tbit: 32,000 GB
512 Tbit: 64,000 GB
1,024 Tbit: 128,000 GB
2,048 Tbit: 256,000 GB
4,096 Tbit: 512,000 GB
8,192 Tbit: 1,024,000 GB
16,384 Tbit: 2,048,000 GB

Related Bit & Byte Converters

Explore other bit & byte conversion tools:

Explore More Bit & Byte Converters

Terabit to Gigabyte FAQ

How do I convert Terabit to Gigabyte?

Multiply by the conversion factor: 1 terabit = 1,000,000,000,000 bits, and 1 gigabyte = 8,000,000,000 bits.

What is 1 terabit in gigabyte?

1 terabit = 125 gigabyte

What is the difference between binary and decimal data units?

Binary units (KiB, MiB, GiB) use powers of 1024. Decimal units (kB, MB, GB) use powers of 1000. The difference is about 4.86% per prefix level.

Byte conversion chart for binary and decimal conversion

Binary System (traditional)

In data storage, traditionally, a kilobyte is 2¹⁰ or 1,024 bytes. This is the BINARY system where multiples of bytes are always some exponent of two.

1 byte (B) = 8 bits (b)
1 kibibyte - KiB | traditional Kilobyte - KB = 2¹⁰ bytes = 1,024 bytes
1 mebibyte - MiB | traditional Megabyte - MB = 2²⁰ bytes = 1,048,576 bytes
1 gibibyte - GiB | traditional Gigabyte - GB = 2³⁰ bytes = 1,073,741,824 bytes
1 tibibyte - TiB | traditional Terabyte - TB = 2⁴⁰ bytes = 1,099,511,627,776 bytes

The Decimal System (SI)

Most hard disk manufacturers use decimal megabytes (10⁶). This is the DECIMAL system where multiples of bytes are always some exponent of ten:

1 byte (B) = 8 bits (b)
1 kilobyte (kB) = 10³ bytes = 1,000 bytes
1 megabyte (MB) = 10⁶ bytes = 1,000,000 bytes
1 gigabyte (GB) = 10⁹ bytes = 1,000,000,000 bytes
1 terabyte (TB) = 10¹² bytes = 1,000,000,000,000 bytes

Multiples of bit

Unit	Symbol	In bits
Bit	bit	1
Kilobit	kbit	1,000
Kibibit	Kibit	1,024
Megabit	Mbit	1,000,000
Mebibit	Mibit	1,048,576
Gigabit	Gbit	1,000,000,000
Gibibit	Gibit	1,073,741,824
Terabit	Tbit	1,000,000,000,000
Tebibit	Tibit	1,099,511,627,776
Petabit	Pbit	1,000,000,000,000,000
Pebibit	Pibit	1,125,899,906,842,620

Multiples of byte

Unit	Symbol	In bits
Byte	B	8
Kilobyte	kB	8,000
Kibibyte	KiB	8,192
Megabyte	MB	8,000,000
Mebibyte	MiB	8,388,608
Gigabyte	GB	8,000,000,000
Gibibyte	GiB	8,589,934,592
Terabyte	TB	8,000,000,000,000
Tebibyte	TiB	8,796,093,022,208
Petabyte	PB	8,000,000,000,000,000
Pebibyte	PiB	9,007,199,254,740,990

References:

All unit conversions on CoolConversion use conversion factors defined or documented by internationally recognised standards bodies (such as ISO and NIST), including both SI and non-SI units.