0.01 Psi to Pascals

0.01 psi ≈ 68.948 Pa

Calculation: Pa = 0.01 psi × 6894.76 ≈ 68.948 Pa

Psi to Pascal Converter

Choose the type of measurement to convert
Select the source unit to convert from
Select the target unit to convert to
Enter a numeric value or fraction to convert
Sig. Figures:

How much pressure is 0.01 psi?

0.010 psi (0.069 kPa) is comparable to a laboratory vacuum, such as inside a glass bell jar.

What does 0.01 psi look like?

Illustration of a vacuum bell jar
0.010 psi (0.069 kPa) is comparable to a laboratory vacuum, such as inside a glass bell jar.

How to Convert Psi to Pascal

1 psi = 6894.76 pascals

Pascal = Psi × 6894.76

Example: 0.01 psi × 6894.76 = 68.948 Pa

Reverse Conversion

To convert pascals back to psi:

  • Remember, 1 pascal equals 0.000145038 psi.
  • To convert 68.948 Pa to psi, multiply 68.948 x 0.000145038, resulting in 0.01 psi.

0.01 psi is also equal to:

  • 0.068948 kPa
  • 0.00068948 bar
About these units

Psi: Imperial/US customary pressure unit equal to one pound-force per square inch.

Pascal: SI derived unit of pressure equal to one newton per square meter (N/m²).

Frequently Asked Questions

How much is 0.01 psi in pascals?

0.01 psi equals 68.948 pascals. This is calculated by multiplying 0.01 by the conversion factor 6894.76.

What does 0.01 psi look like in pascals?

0.01 psi (68.948 pascals) is a very low pressure — below normal tire inflation.

How do you calculate 0.01 psi to pascals?

Multiply 0.01 by the conversion factor 6894.76. The calculation is 0.01 × 6894.76 = 68.948 pascals. This factor is defined by international measurement standards.

Share This Calculation

0.01 psi = 68.9476 pascals
0.01 psi = 68.9476 pascals — conversion chart

For general conversions between psi and pascals, see the psi to pascals converter.

Also convert Psi to:

Conversion factors verified against NIST, BIPM, ISO 80000-4 1 atm = 101 325 Pa by definition (BIPM). Last reviewed: March 2026
Tiago Fernandes Reviewed by Tiago Fernandes

All unit conversions on CoolConversion use conversion factors defined or documented by internationally recognised standards bodies (such as ISO and NIST), including both SI and non-SI units.