1008 Pascals to Mbar

1008 Pa = 10.08 mbar

Calculation: mbar = 1008 Pa × 0.01 = 10.08 mbar

Pascal to Mbar Converter

Choose the type of measurement to convert
Select the source unit to convert from
Select the target unit to convert to
Enter a numeric value or fraction to convert
Sig. Figures:

How much pressure is 1,008 Pa?

0.146 psi (1.008 kPa) is comparable to the thin air at extreme altitude, like the summit of Mount Everest.

What does 1,008 Pa look like?

Illustration of high altitude atmospheric pressure
0.146 psi (1.008 kPa) is comparable to the thin air at extreme altitude, like the summit of Mount Everest.

How to Convert Pascal to Mbar

1 pascal = 0.01 mbar

Mbar = Pascal × 0.01

Example: 1008 Pa × 0.01 = 10.08 mbar

Reverse Conversion

To convert mbar back to pascals:

  • Remember, 1 mbar equals 100 pascals.
  • To convert 10.08 mbar to Pa, multiply 10.08 x 100, resulting in 1008 Pa.

1008 Pa is also equal to:

  • 1.008 kPa
  • 0.01008 bar
  • 0.1462 psi
About these units

Pascal: SI derived unit of pressure equal to one newton per square meter (N/m²).

Mbar: Metric pressure unit equal to one-thousandth of a bar (0.001 bar) or 100 pascals.

Frequently Asked Questions

How much is 1008 pascals in mbar?

1008 pascals equals 10.08 mbar. This is calculated by multiplying 1008 by the conversion factor 0.01.

What does 1008 pascals look like in mbar?

1008 pascals (10.08 mbar) is moderate pressure — approaching atmospheric (101,325 Pa).

How do you calculate 1008 pascals to mbar?

Multiply 1008 by the conversion factor 0.01. The calculation is 1008 × 0.01 = 10.08 mbar. This factor is defined by international measurement standards.

Share This Calculation

1008 pascals = 10.08 mbar
1008 pascals = 10.08 mbar — conversion chart

For general conversions between pascals and mbar, see the pascals to mbar converter.

Also convert Pascals to:

Conversion factors verified against NIST, BIPM, ISO 80000-4 1 atm = 101 325 Pa by definition (BIPM). Last reviewed: March 2026
Tiago Fernandes Reviewed by Tiago Fernandes

All unit conversions on CoolConversion use conversion factors defined or documented by internationally recognised standards bodies (such as ISO and NIST), including both SI and non-SI units.