20 Bar to MPa

20 bar = 2 MPa

Calculation: MPa = 20 bar × 0.1 = 2 MPa

Bar to MPa Converter

Choose the type of measurement to convert
Select the source unit to convert from
Select the target unit to convert to
Enter a numeric value or fraction to convert
Sig. Figures:

How much pressure is 20 bar?

290 psi (2,000 kPa) is comparable to the pressure inside a CO₂ cartridge or small gas cylinder.

What does 20 bar look like?

Illustration of a CO2 cartridge
290 psi (2,000 kPa) is comparable to the pressure inside a CO₂ cartridge or small gas cylinder.

How to Convert Bar to MPa

1 bar = 0.1 MPa

MPa = Bar × 0.1

Example: 20 bar × 0.1 = 2 MPa

Reverse Conversion

To convert MPa back to bar:

  • Remember, 1 MPa equals 10 bar.
  • To convert 2 MPa to bar, multiply 2 x 10, resulting in 20 bar.

20 bar is also equal to:

About these units

Bar: Metric pressure unit equal to exactly 100,000 pascals.

MPa: SI-derived pressure unit equal to 1,000,000 pascals (10⁶ Pa).

Frequently Asked Questions

How much is 20 bar in MPa?

20 bar equals 2 MPa. This is calculated by multiplying 20 by the conversion factor 0.1.

What does 20 bar look like in MPa?

20 bar (2 MPa) is high pressure — scuba regulators or hydraulic lines.

How do you calculate 20 bar to MPa?

Multiply 20 by the conversion factor 0.1. The calculation is 20 × 0.1 = 2 MPa. This factor is defined by international measurement standards.

Share This Calculation

20 bar = 2 MPa
20 bar = 2 MPa — conversion chart

Nearby Conversions

10 bar1 MPa 11 bar1.1 MPa 12 bar1.2 MPa 13 bar1.3 MPa 14 bar1.4 MPa 15 bar1.5 MPa 16 bar1.6 MPa 17 bar1.7 MPa 18 bar1.8 MPa 19 bar1.9 MPa 21 bar2.1 MPa 22 bar2.2 MPa 23 bar2.3 MPa 24 bar2.4 MPa 25 bar2.5 MPa 26 bar2.6 MPa 27 bar2.7 MPa 28 bar2.8 MPa 29 bar2.9 MPa 30 bar3 MPa

For general conversions between bar and MPa, see the bar to MPa converter.

Also convert Bar to:

Conversion factors verified against NIST, BIPM, ISO 80000-4 1 atm = 101 325 Pa by definition (BIPM). Last reviewed: March 2026
Adilson Fernandes By Adilson Fernandes
Tiago Fernandes Reviewed by Tiago Fernandes

All unit conversions on CoolConversion use conversion factors defined or documented by internationally recognised standards bodies (such as ISO and NIST), including both SI and non-SI units.