29 MPa to Bar

29 MPa = 290 bar

Calculation: bar = 29 MPa × 10 = 290 bar

MPa to Bar Converter

Choose the type of measurement to convert
Select the source unit to convert from
Select the target unit to convert to
Enter a numeric value or fraction to convert
Sig. Figures:

How much pressure is 29 MPa?

4,206 psi (29,000 kPa) is comparable to the operating pressure of a hydraulic press.

What does 29 MPa look like?

Illustration of a hydraulic press
4,206 psi (29,000 kPa) is comparable to the operating pressure of a hydraulic press.

Did you know? Concrete compressive strength is 30,000 kPa.

Typical structural concrete has a compressive strength of 20-40 MPa (20,000-40,000 kPa).

How to Convert MPa to Bar

1 MPa = 10 bar

Bar = MPa × 10

Example: 29 MPa × 10 = 290 bar

Reverse Conversion

To convert bar back to MPa:

  • Remember, 1 bar equals 0.1 MPa.
  • To convert 290 bar to MPa, multiply 290 x 0.1, resulting in 29 MPa.

29 MPa is also equal to:

  • 2.9 × 107 pascal
  • 29000 kPa
  • 4206.1 psi
About these units

MPa: SI-derived pressure unit equal to 1,000,000 pascals (10⁶ Pa).

Bar: Metric pressure unit equal to exactly 100,000 pascals.

Frequently Asked Questions

How much is 29 MPa in bar?

29 MPa equals 290 bar. This is calculated by multiplying 29 by the conversion factor 10.

What does 29 MPa look like in bar?

29 MPa (290 bar) is very high pressure — industrial presses and material testing.

How do you calculate 29 MPa to bar?

Multiply 29 by the conversion factor 10. The calculation is 29 × 10 = 290 bar. This factor is defined by international measurement standards.

Share This Calculation

29 MPa = 290 bar
29 MPa = 290 bar — conversion chart

Nearby Conversions

19 MPa190 bar 20 MPa200 bar 21 MPa210 bar 22 MPa220 bar 23 MPa230 bar 24 MPa240 bar 25 MPa250 bar 26 MPa260 bar 27 MPa270 bar 28 MPa280 bar 30 MPa300 bar 31 MPa310 bar 32 MPa320 bar 33 MPa330 bar 34 MPa340 bar 35 MPa350 bar 36 MPa360 bar 37 MPa370 bar 38 MPa380 bar 39 MPa390 bar

For general conversions between MPa and bar, see the MPa to bar converter.

Also convert MPa to:

Conversion factors verified against NIST, BIPM, ISO 80000-4 1 atm = 101 325 Pa by definition (BIPM). Last reviewed: March 2026
Adilson Fernandes By Adilson Fernandes
Tiago Fernandes Reviewed by Tiago Fernandes

All unit conversions on CoolConversion use conversion factors defined or documented by internationally recognised standards bodies (such as ISO and NIST), including both SI and non-SI units.