290 Bar to MPa

290 bar = 29 MPa

Calculation: MPa = 290 bar × 0.1 = 29 MPa

Bar to MPa Converter

Choose the type of measurement to convert
Select the source unit to convert from
Select the target unit to convert to
Enter a numeric value or fraction to convert
Sig. Figures:

How much pressure is 290 bar?

4,206 psi (29,000 kPa) is comparable to the operating pressure of a hydraulic press.

What does 290 bar look like?

Illustration of a hydraulic press
4,206 psi (29,000 kPa) is comparable to the operating pressure of a hydraulic press.

Did you know? Concrete compressive strength is 30,000 kPa.

Typical structural concrete has a compressive strength of 20-40 MPa (20,000-40,000 kPa).

How to Convert Bar to MPa

1 bar = 0.1 MPa

MPa = Bar × 0.1

Example: 290 bar × 0.1 = 29 MPa

Reverse Conversion

To convert MPa back to bar:

  • Remember, 1 MPa equals 10 bar.
  • To convert 29 MPa to bar, multiply 29 x 10, resulting in 290 bar.

290 bar is also equal to:

  • 2.9 × 107 pascal
  • 29000 kPa
  • 4206.1 psi
About these units

Bar: Metric pressure unit equal to exactly 100,000 pascals.

MPa: SI-derived pressure unit equal to 1,000,000 pascals (10⁶ Pa).

Frequently Asked Questions

How much is 290 bar in MPa?

290 bar equals 29 MPa. This is calculated by multiplying 290 by the conversion factor 0.1.

What does 290 bar look like in MPa?

290 bar (29 MPa) is extreme pressure — industrial or scientific applications.

How do you calculate 290 bar to MPa?

Multiply 290 by the conversion factor 0.1. The calculation is 290 × 0.1 = 29 MPa. This factor is defined by international measurement standards.

Share This Calculation

290 bar = 29 MPa
290 bar = 29 MPa — conversion chart

Nearby Conversions

240 bar24 MPa 245 bar24.5 MPa 250 bar25 MPa 255 bar25.5 MPa 260 bar26 MPa 265 bar26.5 MPa 270 bar27 MPa 275 bar27.5 MPa 280 bar28 MPa 285 bar28.5 MPa 295 bar29.5 MPa 300 bar30 MPa 305 bar30.5 MPa 310 bar31 MPa 315 bar31.5 MPa 320 bar32 MPa 325 bar32.5 MPa 330 bar33 MPa 335 bar33.5 MPa 340 bar34 MPa

For general conversions between bar and MPa, see the bar to MPa converter.

Also convert Bar to:

Conversion factors verified against NIST, BIPM, ISO 80000-4 1 atm = 101 325 Pa by definition (BIPM). Last reviewed: March 2026
Adilson Fernandes By Adilson Fernandes
Tiago Fernandes Reviewed by Tiago Fernandes

All unit conversions on CoolConversion use conversion factors defined or documented by internationally recognised standards bodies (such as ISO and NIST), including both SI and non-SI units.