30 Pascals to Bar

30 Pa = 0.0003 bar

Calculation: bar = 30 Pa × 1 × 10⁻⁵ = 0.0003 bar

Pascal to Bar Converter

Choose the type of measurement to convert
Select the source unit to convert from
Select the target unit to convert to
Enter a numeric value or fraction to convert
Sig. Figures:

How much pressure is 30 Pa?

0.004 psi (0.030 kPa) is comparable to a laboratory vacuum, such as inside a glass bell jar.

What does 30 Pa look like?

Illustration of a vacuum bell jar
0.004 psi (0.030 kPa) is comparable to a laboratory vacuum, such as inside a glass bell jar.

How to Convert Pascal to Bar

1 pascal = 1 × 10-5 bar exact

Bar = Pascal × 1 × 10-5

Example: 30 Pa × 1 × 10-5 = 0.0003 bar

Reverse Conversion

To convert bar back to pascals:

  • Remember, 1 bar equals 100000 pascals.
  • To convert 0.0003 bar to Pa, multiply 0.0003 x 100000, resulting in 30 Pa.

exact This conversion factor is exact by international definition.

30 Pa is also equal to:

  • 0.03 kPa
  • 0.0043511 psi
About these units

Pascal: SI derived unit of pressure equal to one newton per square meter (N/m²).

Bar: Metric pressure unit equal to exactly 100,000 pascals.

Frequently Asked Questions

How much is 30 pascals in bar?

30 pascals equals 0.0003 bar. This is calculated by multiplying 30 by the conversion factor 1 × 10⁻⁵.

What does 30 pascals look like in bar?

30 pascals (0.0003 bar) is very low pressure — a gentle breeze creates about 1-10 Pa.

How do you calculate 30 pascals to bar?

Multiply 30 by the conversion factor 1 × 10⁻⁵. The calculation is 30 × 1 × 10⁻⁵ = 0.0003 bar. This factor is defined by international measurement standards.

Share This Calculation

30 pascals = 0.0003 bar
30 pascals = 0.0003 bar — conversion chart

For general conversions between pascals and bar, see the pascals to bar converter.

Also convert Pascals to:

Conversion factors verified against NIST, BIPM, ISO 80000-4 1 atm = 101 325 Pa by definition (BIPM). Last reviewed: March 2026
Tiago Fernandes Reviewed by Tiago Fernandes

All unit conversions on CoolConversion use conversion factors defined or documented by internationally recognised standards bodies (such as ISO and NIST), including both SI and non-SI units.