38 MPa to Psi

38 MPa ≈ 5511.4 psi

Calculation: psi = 38 MPa × 145.038 ≈ 5511.4 psi

MPa to Psi Converter

Choose the type of measurement to convert
Select the source unit to convert from
Select the target unit to convert to
Enter a numeric value or fraction to convert
Sig. Figures:

How much pressure is 38 MPa?

5,511 psi (38,000 kPa) is comparable to the compressive strength of concrete.

What does 38 MPa look like?

Illustration of a concrete compressive strength test
5,511 psi (38,000 kPa) is comparable to the compressive strength of concrete.

How to Convert MPa to Psi

1 MPa = 145.038 psi

Psi = MPa × 145.038

Example: 38 MPa × 145.038 = 5511.4 psi

Reverse Conversion

To convert psi back to MPa:

  • Remember, 1 psi equals 0.00689476 MPa.
  • To convert 5511.4 psi to MPa, multiply 5511.4 x 0.00689476, resulting in 38 MPa.

38 MPa is also equal to:

  • 3.8 × 107 pascal
  • 38000 kPa
  • 380 bar
About these units

MPa: SI-derived pressure unit equal to 1,000,000 pascals (10⁶ Pa).

Psi: Imperial/US customary pressure unit equal to one pound-force per square inch.

Frequently Asked Questions

How much is 38 MPa in psi?

38 MPa equals 5511.4 psi. This is calculated by multiplying 38 by the conversion factor 145.038.

What does 38 MPa look like in psi?

38 MPa (5511.4 psi) is very high pressure — industrial presses and material testing.

How do you calculate 38 MPa to psi?

Multiply 38 by the conversion factor 145.038. The calculation is 38 × 145.038 = 5511.4 psi. This factor is defined by international measurement standards.

Share This Calculation

38 MPa = 5511.43 psi
38 MPa = 5511.43 psi — conversion chart

Nearby Conversions

28 MPa4061 psi 29 MPa4206 psi 30 MPa4351 psi 31 MPa4496 psi 32 MPa4641 psi 33 MPa4786 psi 34 MPa4931 psi 35 MPa5076 psi 36 MPa5221 psi 37 MPa5366 psi 39 MPa5656 psi 40 MPa5802 psi 41 MPa5947 psi 42 MPa6092 psi 43 MPa6237 psi 44 MPa6382 psi 45 MPa6527 psi 46 MPa6672 psi 47 MPa6817 psi 48 MPa6962 psi

For general conversions between MPa and psi, see the MPa to psi converter.

Also convert MPa to:

Conversion factors verified against NIST, BIPM, ISO 80000-4 1 atm = 101 325 Pa by definition (BIPM). Last reviewed: March 2026
Adilson Fernandes By Adilson Fernandes
Tiago Fernandes Reviewed by Tiago Fernandes

All unit conversions on CoolConversion use conversion factors defined or documented by internationally recognised standards bodies (such as ISO and NIST), including both SI and non-SI units.