5 Bar to MPa

5 bar = 0.5 MPa

Calculation: MPa = 5 bar × 0.1 = 0.5 MPa

Bar to MPa Converter

Choose the type of measurement to convert
Select the source unit to convert from
Select the target unit to convert to
Enter a numeric value or fraction to convert
Sig. Figures:

How much pressure is 5 bar?

72.5 psi (500 kPa) is comparable to a road-bicycle tire inflation pressure (65–120 psi).

What does 5 bar look like?

Illustration of a road bicycle tire with gauge
72.5 psi (500 kPa) is comparable to a road-bicycle tire inflation pressure (65–120 psi).

How to Convert Bar to MPa

1 bar = 0.1 MPa

MPa = Bar × 0.1

Example: 5 bar × 0.1 = 12 MPa

Reverse Conversion

To convert MPa back to bar:

  • Remember, 1 MPa equals 10 bar.
  • To convert 12 MPa to bar, multiply 12 x 10, resulting in 5 bar.

5 bar is also equal to:

About these units

Bar: Metric pressure unit equal to exactly 100,000 pascals.

MPa: SI-derived pressure unit equal to 1,000,000 pascals (10⁶ Pa).

Frequently Asked Questions

How much is 5 bar in MPa?

5 bar equals 0.5 MPa. This is calculated by multiplying 5 by the conversion factor 0.1.

What does 5 bar look like in MPa?

5 bar (0.5 MPa) is moderate pressure — truck tires or compressed air tools.

How do you calculate 5 bar to MPa?

Multiply 5 by the conversion factor 0.1. The calculation is 5 × 0.1 = 0.5 MPa. This factor is defined by international measurement standards.

Share This Calculation

5 bar = 0.5 MPa
5 bar = 0.5 MPa — conversion chart

Nearby Conversions

1 bar0.1 MPa 2 bar0.2 MPa 3 bar0.3 MPa 4 bar0.4 MPa 6 bar0.6 MPa 7 bar0.7 MPa 8 bar0.8 MPa 9 bar0.9 MPa 10 bar1 MPa 11 bar1.1 MPa 12 bar1.2 MPa 13 bar1.3 MPa 14 bar1.4 MPa 15 bar1.5 MPa

For general conversions between bar and MPa, see the bar to MPa converter.

Also convert Bar to:

Conversion factors verified against NIST, BIPM, ISO 80000-4 1 atm = 101 325 Pa by definition (BIPM). Last reviewed: March 2026
Adilson Fernandes By Adilson Fernandes
Tiago Fernandes Reviewed by Tiago Fernandes

All unit conversions on CoolConversion use conversion factors defined or documented by internationally recognised standards bodies (such as ISO and NIST), including both SI and non-SI units.