57 Pascals to Bar

57 Pa = 0.00057 bar

Calculation: bar = 57 Pa × 1 × 10⁻⁵ = 0.00057 bar

Pascal to Bar Converter

Choose the type of measurement to convert
Select the source unit to convert from
Select the target unit to convert to
Enter a numeric value or fraction to convert
Sig. Figures:

How much pressure is 57 Pa?

0.008 psi (0.057 kPa) is comparable to a laboratory vacuum, such as inside a glass bell jar.

What does 57 Pa look like?

Illustration of a vacuum bell jar
0.008 psi (0.057 kPa) is comparable to a laboratory vacuum, such as inside a glass bell jar.

How to Convert Pascal to Bar

1 pascal = 1 × 10-5 bar exact

Bar = Pascal × 1 × 10-5

Example: 57 Pa × 1 × 10-5 = 0.00057 bar

Reverse Conversion

To convert bar back to pascals:

  • Remember, 1 bar equals 100000 pascals.
  • To convert 0.00057 bar to Pa, multiply 0.00057 x 100000, resulting in 57 Pa.

exact This conversion factor is exact by international definition.

57 Pa is also equal to:

  • 0.057 kPa
  • 0.0082672 psi
About these units

Pascal: SI derived unit of pressure equal to one newton per square meter (N/m²).

Bar: Metric pressure unit equal to exactly 100,000 pascals.

Frequently Asked Questions

How much is 57 pascals in bar?

57 pascals equals 0.00057 bar. This is calculated by multiplying 57 by the conversion factor 1 × 10⁻⁵.

What does 57 pascals look like in bar?

57 pascals (0.00057 bar) is very low pressure — a gentle breeze creates about 1-10 Pa.

How do you calculate 57 pascals to bar?

Multiply 57 by the conversion factor 1 × 10⁻⁵. The calculation is 57 × 1 × 10⁻⁵ = 0.00057 bar. This factor is defined by international measurement standards.

Share This Calculation

57 pascals = 0.00057 bar
57 pascals = 0.00057 bar — conversion chart

For general conversions between pascals and bar, see the pascals to bar converter.

Also convert Pascals to:

Conversion factors verified against NIST, BIPM, ISO 80000-4 1 atm = 101 325 Pa by definition (BIPM). Last reviewed: March 2026
Tiago Fernandes Reviewed by Tiago Fernandes

All unit conversions on CoolConversion use conversion factors defined or documented by internationally recognised standards bodies (such as ISO and NIST), including both SI and non-SI units.