57 Pascals to Psi

57 Pa ≈ 0.0082672 psi

Calculation: psi = 57 Pa × 0.000145038 ≈ 0.0082672 psi

Pascal to Psi Converter

Choose the type of measurement to convert
Select the source unit to convert from
Select the target unit to convert to
Enter a numeric value or fraction to convert
Sig. Figures:

How much pressure is 57 Pa?

0.008 psi (0.057 kPa) is comparable to a laboratory vacuum, such as inside a glass bell jar.

What does 57 Pa look like?

Illustration of a vacuum bell jar
0.008 psi (0.057 kPa) is comparable to a laboratory vacuum, such as inside a glass bell jar.

How to Convert Pascal to Psi

1 pascal = 0.000145038 psi

Psi = Pascal × 0.000145038

Example: 57 Pa × 0.000145038 = 0.0082672 psi

Reverse Conversion

To convert psi back to pascals:

  • Remember, 1 psi equals 6894.76 pascals.
  • To convert 0.0082672 psi to Pa, multiply 0.0082672 x 6894.76, resulting in 57 Pa.

57 Pa is also equal to:

  • 0.057 kPa
  • 0.00057 bar
About these units

Pascal: SI derived unit of pressure equal to one newton per square meter (N/m²).

Psi: Imperial/US customary pressure unit equal to one pound-force per square inch.

Frequently Asked Questions

How much is 57 pascals in psi?

57 pascals equals 0.0082672 psi. This is calculated by multiplying 57 by the conversion factor 0.000145038.

What does 57 pascals look like in psi?

57 pascals (0.0082672 psi) is very low pressure — a gentle breeze creates about 1-10 Pa.

How do you calculate 57 pascals to psi?

Multiply 57 by the conversion factor 0.000145038. The calculation is 57 × 0.000145038 = 0.0082672 psi. This factor is defined by international measurement standards.

Share This Calculation

57 pascals = 0.00826715 psi
57 pascals = 0.00826715 psi — conversion chart

For general conversions between pascals and psi, see the pascals to psi converter.

Also convert Pascals to:

Conversion factors verified against NIST, BIPM, ISO 80000-4 1 atm = 101 325 Pa by definition (BIPM). Last reviewed: March 2026
Tiago Fernandes Reviewed by Tiago Fernandes

All unit conversions on CoolConversion use conversion factors defined or documented by internationally recognised standards bodies (such as ISO and NIST), including both SI and non-SI units.