1 liter of gasoline in tonnes
1 liter of gasoline equals 0.00075 tonnes
Note: A conversion table for 1 liter of gasoline converted to tonnes is not shown because the resulting values would be extremely small (less than 0.01 tonnes). Consider using a smaller target unit for better precision.
How to Convert 1 liter of Gasoline to Tonnes
Step 1: Get the density
Find the density of gasoline. Different substances have different densities, which affects the conversion. Gasoline at 25 °C | density: 750 kg/m³. The density of gasoline ranges from 0.71–0.77 kg/l (719.7 kg/m3 ; 0.026 lb/in3; 6.073 lb/us gal; 7.29 lb/imp gal), higher densities having a greater volume of aromatics
Step 2: Apply the conversion formula
Multiply 1 liter by the density factor to get the weight in tonnes.
mass = density × volume
Step 3: Get the result
1 liter of gasoline equals 0.00075 tonnes.
Density varies with temperature and pressure. The value shown corresponds to the reference conditions for gasoline. For other conditions, density may differ — especially for gases and volatile liquids.
How to convert from volume to mass (often referred to as weight)?
Well, by definition of density we just need to use the formula:
mass = density × volume
Example: How much does 2 cubic meters of gasoline weigh in kilograms if the gasoline density is 750 kg/m³?
Plugging the values in the formula, we get
mass = density × volume = 750 × 2 = 1500 Kg
Very simple isn't it? Yes, it is as simple as that. But this works fine when the density value we have (from a chart for example) is defined using the same unit of volume and mass that we will use in the formula. For example, mass in kg and volume in liters. If we have, for example, mass in pounds and volume in gallons, we should do something to correct our result.
To transform the mass from pounds to kilograms we should multiply the mass in pounds by 0.45359237. We will call 0.45359237 the mass conversion factor - mcf
Matematically we write:
mass in kilograms = mass in pounds × mcf or
mkg = mlb × mcf (1)
To transform the volume from gallons to cubic meters we should multiply the volume in gallons by 0.003785411784. We will call 0.003785411784 the volume conversion factor - vcf
Matematically we write:
volume in cubic meters = volume in gallons × vcf or
vm³ = vgal × vcf (2)
Now, dividing the equation (1) by the equation (2), we get
mkgvm³ = mlb × mcfvgal × vcf, or
mkgvm³ = mlbvgal × mcfvcf, but mkgvm³ is, by definition, the density (d) in kg/m³, so
d = mlbvgal × mcfvcf
Rearranging the formula above we get
mlb = d × vgal × vcfmcf
Finally, we can generalize this formula any units of mass and volume, since we know how to find the values for mcf and vcf (Check the factor tables below).
m = d × v × vcfmcf
That is exactly the formula that we use in this calculator. You can see how this formula works reading the example above or/and choosing another one at the bottom of this page.
These tables contain the most frequently used vcf and mcf.
| Volume Unit | Factor to convert to m³ (vcf) |
|---|---|
| milliliter | 0.000001 |
| UK fluid ounce | 0.0000284130625 |
| US fluid ounce | 0.00002957352956 |
| UK gallon | 0.00454609 |
| US gallon | 0.003785411784 |
| Mass Unit | Factor to convert to kg (mcf) |
|---|---|
| milligram | 0.000001 |
| gram | 0.001 |
| kilogram | 1 |
| tonne | 1000 |
| pound | 0.45359237 |
| ounce | 0.02834952313 |
Note: The conversion factors shown above are exact values by international definition. The pound (0.45359237 kg) was standardized in 1959, and the US gallon (0.003785411784 m³) is defined exactly as 231 cubic inches. The varying number of decimal places reflects each unit's official definition, not measurement precision.
Data Sources & References
Material density data and descriptions are compiled from authoritative sources:
-
Mass, Weight, Density or Specific Gravity of Liquids - Simetric
Comprehensive database of liquid densities and specific gravities -
Mass, Weight, Density or Specific Gravity of Water at Various Temperatures - Simetric
Temperature-dependent water density data -
Volume to Weight conversions for common substances and materials - aqua-calc.com
Author: Aqua-Calc Team, Published: 2023 -
CRC Handbook of Chemistry and Physics - Chemical and physical properties
Comprehensive reference for chemical compounds and material properties -
ASTM International - Standards for materials testing
Technical standards for chemicals, liquids, and construction materials -
ISO Standards - International material standards
International Organization for Standardization - Material properties -
NIST (National Institute of Standards and Technology) - Measurement standards
Official US standards for weights, measures, and physical constants -
NIST Chemistry WebBook - Thermophysical properties
Database of chemical and physical property data for chemical compounds
FAQs on gasoline weight to volume conversion
1 liter of gasoline equals how many tonnes?
1 liter of gasoline is equivalent 0.00075 tonnes.
How much is 0.00075 tonnes of gasoline in liters?
0.00075 tonnes of gasoline equals 1 liter.
Why do chemical substance conversions vary?
Chemical substance conversions vary because different substances have different densities. For example, a liter of water weighs more than a liter of ethanol because water is denser. Temperature and pressure can also affect density measurements.
Should I measure substances by weight or volume?
Measuring by weight is more accurate than measuring by volume, especially in chemistry and laboratory work. Scientists prefer weight measurements because they are consistent and reproducible regardless of temperature or pressure variations.
Popular Volume to Weight Conversions
Top conversions based on search data: