29.264 Millimeters to Inches

29.264 mm ≈ 1.1521 in

Closest fraction: 1 532″(1.15625 in — differs by less than 1%)

Calculation: in = 29.264 mm × 0.0393701 ≈ 1.1521 in

Millimeter to Inch Converter

Choose the type of measurement to convert
Select the source unit to convert from
Select the target unit to convert to
Enter a numeric value or fraction to convert
Sig. Figures:

How long is 29.264 mm?

29.264 mm (2.93 cm) is comparable to the width of a thumb or the diameter of a coin.

What does 29.264 mm look like?

Comparable to the width of a thumb or the diameter of a coin
29.264 mm (2.93 cm) is comparable to the width of a thumb or the diameter of a coin.

29.264 mm on the inch scale

mm01020304050in00.511.5

29.26 mm = 1.152 in

How to Convert Millimeter to Inch

1 millimeter = 0.0393701 inches exact

Inch = Millimeter × 0.0393701

Example: 29.264 mm × 0.0393701 = 1.1521 in

Reverse Conversion

To convert inches back to millimeters:

  • Remember, 1 inch equals 25.4 millimeters.
  • To convert 1.1521 in to mm, multiply 1.1521 x 25.4, resulting in 29.264 mm.

exact This conversion factor is exact by international definition.

29.264 mm is also equal to:

  • 2.9264 centimeter
  • 0.029264 meter
  • 0.09601 feet
  • 0.032003 yard
About these units

Millimeter: Metric unit equal to one thousandth (1/1000) of a meter.

Inch: Imperial/US customary unit standardized as exactly 25.4 millimeters since 1959.

Frequently Asked Questions

How much is 29.264 millimeters in inches?

29.264 millimeters equals 1.1521 inches. This is calculated by multiplying 29.264 by the conversion factor 0.0393701.

What does 29.264 millimeters look like in inches?

29.264 millimeters (1.1521 inches) is one to four inches — a small component or connector.

How do you calculate 29.264 millimeters to inches?

Multiply 29.264 by the conversion factor 0.0393701. The calculation is 29.264 × 0.0393701 = 1.1521 inches. This factor is defined by international measurement standards.

Share This Calculation

29.264 millimeters = 1.15213 inches
29.264 millimeters = 1.15213 inches — conversion chart

Nearby Conversions

19.264 millimeters0.7584 inches 20.264 millimeters0.7978 inches 21.264 millimeters0.8372 inches 22.264 millimeters0.8765 inches 23.264 millimeters0.9159 inches 24.264 millimeters0.9553 inches 25.264 millimeters0.9946 inches 26.264 millimeters1.034 inches 27.264 millimeters1.073 inches 28.264 millimeters1.113 inches 30.264 millimeters1.191 inches 31.264 millimeters1.231 inches 32.264 millimeters1.27 inches 33.264 millimeters1.31 inches 34.264 millimeters1.349 inches 35.264 millimeters1.388 inches 36.264 millimeters1.428 inches 37.264 millimeters1.467 inches 38.264 millimeters1.506 inches 39.264 millimeters1.546 inches

For general conversions between millimeters and inches, see the millimeters to inches converter.

Also convert Millimeters to:

Conversion factors verified against NIST, BIPM, ISO 80000-3 1 inch = 2.54 cm by international agreement (1959). Last reviewed: March 2026
Adilson Fernandes By Adilson Fernandes
Tiago Fernandes Reviewed by Tiago Fernandes

All unit conversions on CoolConversion use conversion factors defined or documented by internationally recognised standards bodies (such as ISO and NIST), including both SI and non-SI units.