220 Psi to MPa

220 psi ≈ 1.5168 MPa

Calculation: MPa = 220 psi × 0.00689476 ≈ 1.5168 MPa

Psi to MPa Converter

Choose the type of measurement to convert
Select the source unit to convert from
Select the target unit to convert to
Enter a numeric value or fraction to convert
Sig. Figures:

How much pressure is 220 psi?

220 psi (1,517 kPa) is comparable to the pressure inside a CO₂ cartridge or small gas cylinder.

What does 220 psi look like?

Illustration of a CO2 cartridge
220 psi (1,517 kPa) is comparable to the pressure inside a CO₂ cartridge or small gas cylinder.

How to Convert Psi to MPa

1 psi = 0.00689476 MPa

MPa = Psi × 0.00689476

Example: 220 psi × 0.00689476 = 1.5168 MPa

Reverse Conversion

To convert MPa back to psi:

  • Remember, 1 MPa equals 145.038 psi.
  • To convert 1.5168 MPa to psi, multiply 1.5168 x 145.038, resulting in 220 psi.

220 psi is also equal to:

About these units

Psi: Imperial/US customary pressure unit equal to one pound-force per square inch.

MPa: SI-derived pressure unit equal to 1,000,000 pascals (10⁶ Pa).

Frequently Asked Questions

How much is 220 psi in MPa?

220 psi equals 1.5168 MPa. This is calculated by multiplying 220 by the conversion factor 0.00689476.

What does 220 psi look like in MPa?

220 psi (1.5168 MPa) is very high pressure — scuba tanks (3,000 psi) or industrial cylinders.

How do you calculate 220 psi to MPa?

Multiply 220 by the conversion factor 0.00689476. The calculation is 220 × 0.00689476 = 1.5168 MPa. This factor is defined by international measurement standards.

Share This Calculation

220 psi = 1.51685 MPa
220 psi = 1.51685 MPa — conversion chart

Nearby Conversions

170 psi1.172 MPa 175 psi1.207 MPa 180 psi1.241 MPa 185 psi1.276 MPa 190 psi1.31 MPa 195 psi1.344 MPa 200 psi1.379 MPa 205 psi1.413 MPa 210 psi1.448 MPa 215 psi1.482 MPa 225 psi1.551 MPa 230 psi1.586 MPa 235 psi1.62 MPa 240 psi1.655 MPa 245 psi1.689 MPa 250 psi1.724 MPa 255 psi1.758 MPa 260 psi1.793 MPa 265 psi1.827 MPa 270 psi1.862 MPa

For general conversions between psi and MPa, see the psi to MPa converter.

Also convert Psi to:

Conversion factors verified against NIST, BIPM, ISO 80000-4 1 atm = 101 325 Pa by definition (BIPM). Last reviewed: March 2026
Adilson Fernandes By Adilson Fernandes
Tiago Fernandes Reviewed by Tiago Fernandes

All unit conversions on CoolConversion use conversion factors defined or documented by internationally recognised standards bodies (such as ISO and NIST), including both SI and non-SI units.