290 Psi to MPa

290 psi ≈ 1.9995 MPa

Calculation: MPa = 290 psi × 0.00689476 ≈ 1.9995 MPa

Psi to MPa Converter

Choose the type of measurement to convert
Select the source unit to convert from
Select the target unit to convert to
Enter a numeric value or fraction to convert
Sig. Figures:

How much pressure is 290 psi?

290 psi (1,999 kPa) is comparable to the pressure inside a CO₂ cartridge or small gas cylinder.

What does 290 psi look like?

Illustration of a CO2 cartridge
290 psi (1,999 kPa) is comparable to the pressure inside a CO₂ cartridge or small gas cylinder.

How to Convert Psi to MPa

1 psi = 0.00689476 MPa

MPa = Psi × 0.00689476

Example: 290 psi × 0.00689476 = 1.9995 MPa

Reverse Conversion

To convert MPa back to psi:

  • Remember, 1 MPa equals 145.038 psi.
  • To convert 1.9995 MPa to psi, multiply 1.9995 x 145.038, resulting in 290 psi.

290 psi is also equal to:

  • 1999500 pascal
  • 1999.5 kPa
  • 19.995 bar
About these units

Psi: Imperial/US customary pressure unit equal to one pound-force per square inch.

MPa: SI-derived pressure unit equal to 1,000,000 pascals (10⁶ Pa).

Frequently Asked Questions

How much is 290 psi in MPa?

290 psi equals 1.9995 MPa. This is calculated by multiplying 290 by the conversion factor 0.00689476.

What does 290 psi look like in MPa?

290 psi (1.9995 MPa) is very high pressure — scuba tanks (3,000 psi) or industrial cylinders.

How do you calculate 290 psi to MPa?

Multiply 290 by the conversion factor 0.00689476. The calculation is 290 × 0.00689476 = 1.9995 MPa. This factor is defined by international measurement standards.

Share This Calculation

290 psi = 1.99948 MPa
290 psi = 1.99948 MPa — conversion chart

Nearby Conversions

240 psi1.655 MPa 245 psi1.689 MPa 250 psi1.724 MPa 255 psi1.758 MPa 260 psi1.793 MPa 265 psi1.827 MPa 270 psi1.862 MPa 275 psi1.896 MPa 280 psi1.931 MPa 285 psi1.965 MPa 295 psi2.034 MPa 300 psi2.068 MPa 305 psi2.103 MPa 310 psi2.137 MPa 315 psi2.172 MPa 320 psi2.206 MPa 325 psi2.241 MPa 330 psi2.275 MPa 335 psi2.31 MPa 340 psi2.344 MPa

For general conversions between psi and MPa, see the psi to MPa converter.

Also convert Psi to:

Conversion factors verified against NIST, BIPM, ISO 80000-4 1 atm = 101 325 Pa by definition (BIPM). Last reviewed: March 2026
Adilson Fernandes By Adilson Fernandes
Tiago Fernandes Reviewed by Tiago Fernandes

All unit conversions on CoolConversion use conversion factors defined or documented by internationally recognised standards bodies (such as ISO and NIST), including both SI and non-SI units.