438 Pascals to Bar

438 Pa = 0.00438 bar

Calculation: bar = 438 Pa × 1 × 10⁻⁵ = 0.00438 bar

Pascal to Bar Converter

Choose the type of measurement to convert
Select the source unit to convert from
Select the target unit to convert to
Enter a numeric value or fraction to convert
Sig. Figures:

How much pressure is 438 Pa?

0.064 psi (0.438 kPa) is comparable to a laboratory vacuum, such as inside a glass bell jar.

What does 438 Pa look like?

Illustration of a vacuum bell jar
0.064 psi (0.438 kPa) is comparable to a laboratory vacuum, such as inside a glass bell jar.

How to Convert Pascal to Bar

1 pascal = 1 × 10-5 bar exact

Bar = Pascal × 1 × 10-5

Example: 438 Pa × 1 × 10-5 = 0.00438 bar

Reverse Conversion

To convert bar back to pascals:

  • Remember, 1 bar equals 100000 pascals.
  • To convert 0.00438 bar to Pa, multiply 0.00438 x 100000, resulting in 438 Pa.

exact This conversion factor is exact by international definition.

438 Pa is also equal to:

  • 0.438 kPa
  • 0.063527 psi
About these units

Pascal: SI derived unit of pressure equal to one newton per square meter (N/m²).

Bar: Metric pressure unit equal to exactly 100,000 pascals.

Frequently Asked Questions

How much is 438 pascals in bar?

438 pascals equals 0.00438 bar. This is calculated by multiplying 438 by the conversion factor 1 × 10⁻⁵.

What does 438 pascals look like in bar?

438 pascals (0.00438 bar) is low pressure — sound pressure or gentle airflow.

How do you calculate 438 pascals to bar?

Multiply 438 by the conversion factor 1 × 10⁻⁵. The calculation is 438 × 1 × 10⁻⁵ = 0.00438 bar. This factor is defined by international measurement standards.

Share This Calculation

438 pascals = 0.00438 bar
438 pascals = 0.00438 bar — conversion chart

For general conversions between pascals and bar, see the pascals to bar converter.

Also convert Pascals to:

Conversion factors verified against NIST, BIPM, ISO 80000-4 1 atm = 101 325 Pa by definition (BIPM). Last reviewed: March 2026
Tiago Fernandes Reviewed by Tiago Fernandes

All unit conversions on CoolConversion use conversion factors defined or documented by internationally recognised standards bodies (such as ISO and NIST), including both SI and non-SI units.