448 Pascals to Bar

448 Pa = 0.00448 bar

Calculation: bar = 448 Pa × 1 × 10⁻⁵ = 0.00448 bar

Pascal to Bar Converter

Choose the type of measurement to convert
Select the source unit to convert from
Select the target unit to convert to
Enter a numeric value or fraction to convert
Sig. Figures:

How much pressure is 448 Pa?

0.065 psi (0.448 kPa) is comparable to a laboratory vacuum, such as inside a glass bell jar.

What does 448 Pa look like?

Illustration of a vacuum bell jar
0.065 psi (0.448 kPa) is comparable to a laboratory vacuum, such as inside a glass bell jar.

How to Convert Pascal to Bar

1 pascal = 1 × 10-5 bar exact

Bar = Pascal × 1 × 10-5

Example: 448 Pa × 1 × 10-5 = 0.00448 bar

Reverse Conversion

To convert bar back to pascals:

  • Remember, 1 bar equals 100000 pascals.
  • To convert 0.00448 bar to Pa, multiply 0.00448 x 100000, resulting in 448 Pa.

exact This conversion factor is exact by international definition.

448 Pa is also equal to:

  • 0.448 kPa
  • 0.064977 psi
About these units

Pascal: SI derived unit of pressure equal to one newton per square meter (N/m²).

Bar: Metric pressure unit equal to exactly 100,000 pascals.

Frequently Asked Questions

How much is 448 pascals in bar?

448 pascals equals 0.00448 bar. This is calculated by multiplying 448 by the conversion factor 1 × 10⁻⁵.

What does 448 pascals look like in bar?

448 pascals (0.00448 bar) is low pressure — sound pressure or gentle airflow.

How do you calculate 448 pascals to bar?

Multiply 448 by the conversion factor 1 × 10⁻⁵. The calculation is 448 × 1 × 10⁻⁵ = 0.00448 bar. This factor is defined by international measurement standards.

Share This Calculation

448 pascals = 0.00448 bar
448 pascals = 0.00448 bar — conversion chart

For general conversions between pascals and bar, see the pascals to bar converter.

Also convert Pascals to:

Conversion factors verified against NIST, BIPM, ISO 80000-4 1 atm = 101 325 Pa by definition (BIPM). Last reviewed: March 2026
Tiago Fernandes Reviewed by Tiago Fernandes

All unit conversions on CoolConversion use conversion factors defined or documented by internationally recognised standards bodies (such as ISO and NIST), including both SI and non-SI units.