8 m³ of petroleum ether in kg

8 cubic meters of petroleum ether equals 5120 kilograms

How to Convert 8 cubic meters of Petroleum Ether to Kilograms

Step 1: Get the density

Find the density of petroleum ether. Different substances have different densities, which affects the conversion. Petroleum ether at 20 °C | density: 640 kg/m³

Step 2: Apply the conversion formula

Multiply 8 cubic meters by the density factor to get the weight in kilograms.

mass = density × volume

Step 3: Get the result

8 cubic meters of petroleum ether equals 5120 kilograms.

Density varies with temperature and pressure. The value shown corresponds to the reference conditions for petroleum ether. For other conditions, density may differ — especially for gases and volatile liquids.

How to convert from volume to mass (often referred to as weight)?

Well, by definition of density we just need to use the formula:

mass = density × volume

Example: How much does 2 cubic meters of gasoline weigh in kilograms if the gasoline density is 750 kg/m³?

Plugging the values in the formula, we get

mass = density × volume = 750 × 2 = 1500 Kg

Very simple isn't it? Yes, it is as simple as that. But this works fine when the density value we have (from a chart for example) is defined using the same unit of volume and mass that we will use in the formula. For example, mass in kg and volume in liters. If we have, for example, mass in pounds and volume in gallons, we should do something to correct our result.

To transform the mass from pounds to kilograms we should multiply the mass in pounds by 0.45359237. We will call 0.45359237 the mass conversion factor - mcf

Matematically we write:

mass in kilograms = mass in pounds × mcf or

m_kg = m_lb × mcf (1)

To transform the volume from gallons to cubic meters we should multiply the volume in gallons by 0.003785411784. We will call 0.003785411784 the volume conversion factor - vcf

Matematically we write:

volume in cubic meters = volume in gallons × vcf or

v_m³ = v_gal × vcf (2)

Now, dividing the equation (1) by the equation (2), we get

m_kgv_m³ = m_lb × mcfv_gal × vcf, or

m_kgv_m³ = m_lbv_gal × mcfvcf, but m_kgv_m³ is, by definition, the density (d) in kg/m³, so

d = m_lbv_gal × mcfvcf

Rearranging the formula above we get

m_lb = d × v_gal × vcfmcf

Finally, we can generalize this formula any units of mass and volume, since we know how to find the values for mcf and vcf (Check the factor tables below).

m = d × v × vcfmcf

That is exactly the formula that we use in this calculator. You can see how this formula works reading the example above or/and choosing another one at the bottom of this page.

These tables contain the most frequently used vcf and mcf.

Volume Unit	Factor to convert to m³ (vcf)
milliliter	0.000001
UK fluid ounce	0.0000284130625
US fluid ounce	0.00002957352956
UK gallon	0.00454609
US gallon	0.003785411784

Mass Unit	Factor to convert to kg (mcf)
milligram	0.000001
gram	0.001
kilogram	1
tonne	1000
pound	0.45359237
ounce	0.02834952313

Note: The conversion factors shown above are exact values by international definition. The pound (0.45359237 kg) was standardized in 1959, and the US gallon (0.003785411784 m³) is defined exactly as 231 cubic inches. The varying number of decimal places reflects each unit's official definition, not measurement precision.

Data Sources & References

Material density data and descriptions are compiled from authoritative sources:

1. Mass, Weight, Density or Specific Gravity of Liquids - Simetric
   Comprehensive database of liquid densities and specific gravities
2. Mass, Weight, Density or Specific Gravity of Water at Various Temperatures - Simetric
   Temperature-dependent water density data
3. Volume to Weight conversions for common substances and materials - aqua-calc.com
   Author: Aqua-Calc Team, Published: 2023
4. CRC Handbook of Chemistry and Physics - Chemical and physical properties
   Comprehensive reference for chemical compounds and material properties
5. ASTM International - Standards for materials testing
   Technical standards for chemicals, liquids, and construction materials
6. ISO Standards - International material standards
   International Organization for Standardization - Material properties
7. NIST (National Institute of Standards and Technology) - Measurement standards
   Official US standards for weights, measures, and physical constants
8. NIST Chemistry WebBook - Thermophysical properties
   Database of chemical and physical property data for chemical compounds

Popular Volume to Weight Conversions

Top conversions based on search data: