2/3 m³ of crude oil, texas in tonnes
2/3 cubic meters of crude oil, texas equals 0.582 ( ~
Volume to 'Weight' Converter - Chemistry
How to convert 2/3 cubic meters of crude oil, texas to tonnes
To convert a quantity of a substance or material expressed as a volume to mass we simply use the formula:
mass = density × volume
We want to calculate the mass in tonnes from a volume in cubic meters. We have the density table at the bottom of this web page that shows us the densities values in kg/m³, so we will use the folowing formula (see why below):
mass = d × v × vcfmcf, where mcf is the conversion factor to convert from tonne to kilogram (table near the end of this page) and vcf equals 1 because the volume is already in cubic meters.
So, plugging these values in the formula above, we get:
mass = 873 × 2/3 × 11000
mass = 582 × 11000
mass = 0.582 tonnes (answer)
There are other ways to convert from volume to mass. This is one of them.
How to convert from volume to mass (incorrectly called weight)?
Well, by definition of density we just need to use the formula:
mass = density × volume
Example: How much does 2 cubic meters of gasoline weigh in kilograms if the gasoline density is 750 kg/m³?
Plugging the values in the formula, we get
mass = density × volume = 750 × 2 = 1500 Kg
Very simple isn't it? Yes, it is as simple as that. But this works fine when the density value we have (from a chart for example) is defined using the same unit of volume and mass that we will use in the formula. For example, mass in kg and volume in liters. If we have, for example, mass in pounds and volume in gallons, we should do something to correct our result.
To transform the mass from pounds to kilograms we should multiply the mass in pounds by 0.45359237. We will call 0.45359237 the mass conversion factor - mcf
Matematically we write:
mass in kilograms = mass in pounds × mcf or
mkg = mlb × mcf (1)
To transform the volume from gallons to cubic meters we should multiply the volume in cubic meters by 0.003785411784. We will call 0.003785411784 the volume conversion factor - vcf
Matematically we write:
volume in cubic meters = volume in gallons × vcf or
vm³ = vgal × vcf (2)
Now, dividing the equation (1) by the equation (2), we get
mkgvm³ = mlb × mcfvgal × vcf, or
mkgvm³ = mlbvgal × mcfvcf, but mkgvm³ is, by definition, the density (d) in kg/m³, so
d = mlbvgal × mcfvcf
Rearranging the formula above we get
mlb = d × vgal × vcfmcf
Finally, we can generalize this formula any units of mass and volume, since we know how to find the values for mcf and vcf (Check the factor tables below).
m = d × v × vcfmcf
That is exactly the formula that we use in this calculator. You can see how this formula works reading the example above or/and choosing another one at the bottom of this page.
Cubic meters of crude oil, texas to tonnes Chart
Cubic meters of crude oil, texas to tonnes | ||
---|---|---|
0.576667 cubic meters of crude oil, texas | = | 0.503 tonnes |
0.586667 cubic meters of crude oil, texas | = | 0.512 tonnes |
0.596667 cubic meters of crude oil, texas | = | 0.521 tonnes |
0.606667 cubic meters of crude oil, texas | = | 0.53 tonnes |
0.616667 cubic meters of crude oil, texas | = | 0.538 tonnes |
0.626667 cubic meters of crude oil, texas | = | 0.547 tonnes |
0.636667 cubic meters of crude oil, texas | = | 0.556 tonnes |
0.646667 cubic meters of crude oil, texas | = | 0.565 tonnes |
0.656667 cubic meters of crude oil, texas | = | 0.573 tonnes |
2/3 cubic meters of crude oil, texas | = | 0.582 tonnes |
Cubic meters of crude oil, texas to tonnes | ||
---|---|---|
2/3 cubic meters of crude oil, texas | = | 0.582 tonnes |
0.676667 cubic meters of crude oil, texas | = | 0.591 tonnes |
0.686667 cubic meters of crude oil, texas | = | 0.599 tonnes |
0.696667 cubic meters of crude oil, texas | = | 0.608 tonnes |
0.706667 cubic meters of crude oil, texas | = | 0.617 tonnes |
0.716667 cubic meters of crude oil, texas | = | 0.626 tonnes |
0.726667 cubic meters of crude oil, texas | = | 0.634 tonnes |
0.736667 cubic meters of crude oil, texas | = | 0.643 tonnes |
0.746667 cubic meters of crude oil, texas | = | 0.652 tonnes |
0.756667 cubic meters of crude oil, texas | = | 0.661 tonnes |
Note: some values may be rounded.
These tables contain the most frequently used vcf and mcf.
Volume Unit | Factor to convert to m³ (vcf) |
---|---|
milliliter | 0.000001 |
UK fluid ounce | 0.0000284130625 |
US fluid ounce | 0.00002957352956 |
UK gallon | 0.00454609 |
US gallon | 0.003785411784 |
Mass Unit | Factor to convert to kg (mcf) |
---|---|
milligram | 0.000001 |
gram | 0.001 |
tonne | 1000 |
pound | 0.45359237 |
ounce | 0.02834952313 |
References:
FAQs on crude oil, texas weight to volume conversion
2/3 cubic meters of crude oil, texas equals how many tonnes?
2/3 cubic meters of crude oil, texas is equivalent 0.582 ( ~
How much is 0.582 tonnes of crude oil, texas in cubic meters?
0.582 tonnes of crude oil, texas equals 2/3 cubic meters.